Skip to content
Green Concrete LTC
Laboratory for Trans-border Cooperation
Green Concrete LTC
  • About
    • About the LTC
    • LTC Members
      • CFM
      • CyVi Group
      • DIPC
      • I2M
      • ICMCB
      • ISM
      • MPC
      • Polymat
      • Tecnalia
      • UPV / EHU
  • Research
    • Research Areas
    • Projects
    • Publications
  • Training
    • Theses
  • People
  • Baskrete
  • Events
  • News
  • Contact
  • About
    • About the LTC
    • LTC Members
      • CFM
      • CyVi Group
      • DIPC
      • I2M
      • ICMCB
      • ISM
      • MPC
      • Polymat
      • Tecnalia
      • UPV / EHU
  • Research
    • Research Areas
    • Projects
    • Publications
  • Training
    • Theses
  • People
  • Baskrete
  • Events
  • News
  • Contact

Category Archives: News

NaturSea-PV Public Kick-off

NewsBy Green Concrete LTC16/05/2023

Big success for NaturSea-PV public kick-off that took place at Capital C in Amsterdam on March 15th. The approximately 80 researchers and professionals registered for this co-creation event took advantage…

CFM-CSIC and TECNALIA recognized as “Key innovators” by the EU

NewsBy Green Concrete LTC01/03/2023

A panel of experts of the European Commission has recognized that EU-funded Research & Innovation project MIRACLE might produce a breakthrough impact and that CFM-CSIC and TECNALIA are key for…

We are hiring: PhD Grant available!

NewsBy Green Concrete LTC26/12/2022

Due to aging buildings and climate change, this research gives a “green tinge” to reinforced concrete refurbishment technology, reducing its environmental impact, and strengthening decarbonation in the use of resources,…

PCES: We have a new project!

NewsBy Green Concrete LTC20/12/2022

Today (20th December 2022) we had the kick-off meeting of our new project “PCES, Photonic Concrete for Environmental Solutions” (TED2021-132074B-C33), funded by the Agencia Estatal de Investigación (AEI). Here we seek…

MIRACLE’s pitch on the web

NewsBy Green Concrete LTC01/12/2022

The recording of the pitch of MIRACLE’s project on the Spotlight Event organized by the European Innovation Council and SMEs Executive Agency (EISMEA) and EIT Climate-KIC is available on the…

The LTC on the radio

NewsBy Green Concrete LTC18/11/2022

Edurne Erkizia and Juan José Gaitero talked in Ekosfera radio programme about the LTC-Green Concrete, and the Photonic-Meta-Concrete of Miracle project. The programme was broadcast in November 16 in Euskadi…

NaturSea-PV: We have a new project!

NewsBy Green Concrete LTC14/11/2022

Last week (November 3, 2022) we celebrated the kick off meeting of a new and challenging project: NOVEL ECO-CEMENTITIOUS MATERIALS AND COMPONENTS FOR DURABLE, COMPETITIVE, AND BIO-INSPIRED OFFSHORE FLOATING PV…

LTC-Green Concrete on REHABEND 2022

NewsBy Green Concrete LTC05/10/2022

Two researchers of the LTC took part last September on the congress REHABEND 2022, hold in Granada (Spain). In particular, A. Santamaría and J.T. San-José from UPV/EHU presented the works:…

New master thesis defended successfully

NewsBy Green Concrete LTC27/07/2022

On Tuesday, July 20, the UPV-EHU Master’s student in Chemistry and Polymers, Alejandro Herranz Berzosa, successfully defended his master’s thesis entitled “Síntesis de copolímero poli(ácido metacrílico-co-polietilenglicol metacrilato) y estudio del…

Advanced mortars intalled in Tecnalia’s HarshLab

NewsBy Green Concrete LTC25/07/2022

Superhydrophobic and self-healing mortar specimens have been placed in Tecnalia´s offshore testing facility HarshLab to evaluate their performance under marine conditions. This study is part of NEOMAT project (Elkartek kk-2021/00059)…

123

Archives

  • July 2024
  • February 2024
  • November 2023
  • October 2023
  • September 2023
  • July 2023
  • June 2023
  • May 2023
  • March 2023
  • December 2022
  • November 2022
  • October 2022
  • July 2022
  • May 2022

Categories

  • News
© 2024 Green Concrete LTC
Go to Top
Gestionar el consentimiento de las cookies
Para ofrecer las mejores experiencias, utilizamos tecnologías como las cookies para almacenar y/o acceder a la información del dispositivo. El consentimiento de estas tecnologías nos permitirá procesar datos como el comportamiento de navegación o las identificaciones únicas en este sitio. No consentir o retirar el consentimiento, puede afectar negativamente a ciertas características y funciones.
Funcional Always active
El almacenamiento o acceso técnico es estrictamente necesario para el propósito legítimo de permitir el uso de un servicio específico explícitamente solicitado por el abonado o usuario, o con el único propósito de llevar a cabo la transmisión de una comunicación a través de una red de comunicaciones electrónicas.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Estadísticas
The technical storage or access that is used exclusively for statistical purposes. El almacenamiento o acceso técnico que se utiliza exclusivamente con fines estadísticos anónimos. Sin un requerimiento, el cumplimiento voluntario por parte de tu Proveedor de servicios de Internet, o los registros adicionales de un tercero, la información almacenada o recuperada sólo para este propósito no se puede utilizar para identificarte.
Marketing
El almacenamiento o acceso técnico es necesario para crear perfiles de usuario para enviar publicidad, o para rastrear al usuario en una web o en varias web con fines de marketing similares.
Manage options Manage services Manage {vendor_count} vendors Read more about these purposes
Ver preferencias
{title} {title} {title}
CLINKER ENGINEERING: OPTIMIZATION OR DEVELOPMENT OF NEW CLINKERIZATION PROCESSES AND PRODUCTS

The environmental footprint of cement composites comes from three sources: CO2 emissions, energy demand and consumption of raw materials. The main contributor to the first one is the clinkerization process itself that involves high temperatures and the decarbonation of raw materials. Over the years, cement producers have made an important effort to improve the efficiency of the process, but they are arriving at a point where further improvement is no longer possible without a technological breakthrough. The activities of the LTC in this matter will focus mainly in the development of alternative production methods, like microwave clinkerization or hydrothermal treatments, and the improvement of clinker itself by the activation of less reactive phases or the promotion of the most reactive ones.

PERFORMANCE: SCIENCE AND TECHNOLOGY OF THE PROPERTIES AND APPLICATIONS OF CEMENTITIOUS MATERIALS

Cement composites are really awesome. First, they are very cheap and can be produced almost anywhere in the world using solely local materials. In addition, upon mixing of the solid components (mainly cement and aggregates) with water, a fresh cement composite is obtained. In such state, the material can even be pumped to the top of a skyscraper where it will acquire the shape of the mold where it is poured in. And then, after some time the material will harden at ambient conditions without human intervention. But the best of all is that the properties of the fresh and hardened material as well as the time it takes to become rock-solid can be tuned almost at wish. Nonetheless the development of cement composites with improved performance (strength, toughness, durability, thermal stability, etc.) never stops and it will be one of the main objectives of the LTC. The same applies to the development of novel functionalities (electrical conductivity, sensing capacity, self-healing, thermal properties, energy harvesting, etc.). Not to forget two of the main drivers of the last and coming years in Europe, the reduction of the environmental impact (and its quantification) and the digitalization of the industrial processes that will also be considered.

NANOADDITIONS: SYNTHESIS OF NOVEL ADDITIONS, ADMIXTURES AND ADDITIVES FOR CEMENT COMPOSITES

Additions, admixtures and additives are added during the process of the production of the cement or the cement composites to improve their performance. Therefore, the concrete of the future cannot be conceived without the development of processes (like supercritical fluids) for the synthesis of additions and additives with new or improved properties. Special focus will be placed on the development of nano-enabled material (nanoparticles and nanostructured materials) and superplasticizers; although other products might also be considered.

HYDRATION ENGINEERING: MULTI SCALE STUDY OF THE STRUCTURE AND PROPERTIES OF THE CEMENT MATRIX

Cement matrix is a truly multi-scale structure whose features at the lower levels (nano-scale) have a substantial effect in the highest ones (macro-scale), and in the macroscopic properties. Furthermore, it is a “living” material whose properties may evolve for years due to a combination of physical and chemical phenomena. As a consequence, a deep study of the matrix requires of the participation of multidisciplinary teams that combine expertise on sample preparation, multi-scale simulation techniques, engineering tests, materials’ characterization methods, and so on.